Showing 1–36 of 81 results

MESH HEAD 6 INCH

 12,95 14,95

For acoustic drums

682Drums XS-PRO mesh head 6 inch fits on:
  • Acoustic kits (all brands)
Available in:
  • 2 layers black
  • 3 layers white

MESH HEAD 8 INCH

 13,95 15,95

For electronic and acoustic drums

You can choose two types of mesh heads:
  • XS-PRO mesh heads with 2 layers.
  • XS-PRO+ mesh heads with 2 layers + a RealHit layer. The RealHit layer is an extra layer which not only improves the feel of your kit but also the looks!
682Drums mesh head 8 inch fits on:
  • Roland V-drums (pads and kick)
  • Alesis kits (mylar/mesh)
  • Medeli (mylar/mesh)
  • Acoustic kits (all brands)
 

MESH HEAD 10 INCH

 14,95 16,95

For electronic and acoustic drums

You can choose two types of mesh heads:
  • XS-PRO mesh heads with 2 layers.
  • XS-PRO+ mesh heads with 2 layers + a RealHit layer. The RealHit layer is an extra layer which not only improves the feel of your kit but also the looks!
682Drums mesh head 10 inch fits on:
  • Roland V-drums (pads and kick)
  • Alesis kits (mylar/mesh)
  • Medeli (mylar/mesh)
  • Acoustic kits (all brands)
Available in:
  • XS-PRO black
  • XS-PRO+ (RealHit) black
  • XS-PRO+ (RealHit) white

MESH HEAD 12 INCH

 15,95 17,95

For electronic and acoustic drums

You can choose two types of mesh heads:
  • XS-PRO mesh heads with 2 layers.
  • XS-PRO+ mesh heads with 2 layers + a RealHit layer. The RealHit layer is an extra layer which not only improves the feel of your kit but also the looks!
682Drums mesh heads 12 inch fits on:
  • Roland V-drums (pads and kick)
  • Alesis kits (mylar/mesh)
  • Medeli (mylar/mesh)
  • Acoustic kits (all brands)
Available in:
  • XS-PRO black
  • XS-PRO+ (RealHit) black
  • XS-PRO+ (RealHit) white

MESH HEAD 13 INCH

 16,95 18,95
For electronic and acoustic drums You can choose two types of mesh heads:
  • XS-PRO mesh heads with 2 layers.
  • XS-PRO+ mesh heads with 2 layers + a RealHit layer. The RealHit layer is an extra layer which not only improves the feel of your kit but also the looks!
682Drums mesh head 13 inch fits on:
  • Acoustic kits (all brands)
Available in:
  • XS-PRO black
  • XS-PRO+ (RealHit) black
  • XS-PRO+ (RealHit) white

MESH HEAD 14 INCH

 18,95 20,95

For electronic and acoustic drums

You can choose two types of mesh heads:
  • XS-PRO mesh heads with 2 layers.
  • XS-PRO+ mesh heads with 2 layers + a RealHit layer. The RealHit layer is an extra layer which not only improves the feel of your kit but also the looks!
 682Drums mesh head 14 inch fits on:
  • Roland V-drums
  • Acoustic drum kits (all brands)
Available in:
  • XS-PRO black
  • XS-PRO+ (RealHit) black
  • XS-PRO+ (RealHit) white

MESH HEAD 16 INCH

 22,95 24,95

For acoustic drums

You can choose two types of mesh heads:
  • XS-PRO mesh heads with 2 layers.
  • XS-PRO+ mesh heads with 2 layers a RealHit layer. The RealHit layer is an extra layer which not only improves the feel of your kit but also the looks!
682Drums mesh head 16 inch fits on:
  • Acoustic kits (all brands)
Available in:
  • XS-PRO black
  • XS-PRO+ (RealHit) black
  • XS-PRO+ (RealHit) white

MESH HEAD 18 INCH

 25,95 27,95

For acoustic drums

You can choose two types of mesh heads:
  • XS-PRO mesh heads with 2 layers.
  • XS-PRO+ mesh heads with 2 layers + a RealHit layer. The RealHit layer is an extra layer which not only improves the feel of your kit but also the looks!
 682Drums mesh head 18 inch fits on:
  • Acoustic kits (all brands)
  • You can use our 18 inch mesh head also for your bass drum! Heavy duty tested by many drummers. As a result the bounce back is natural and the strength is unimaginable.
Available in:
  • XS-PRO black
  • XS-PRO+ (RealHit) black
  • XS-PRO+ (RealHit) white

MESH HEAD 22 INCH BASS DRUM

 34,95 36,95

For acoustic drums

You can choose two types of mesh heads:
  • XS-PRO mesh heads with 2 layers.
  • XS-PRO+ mesh heads with 2 layers + a RealHit layer. The RealHit layer is an extra layer which not only improves the feel of your kit but also the looks!
 682Drums mesh head 22 inch fits on:
  • Acoustic kits (all brands)
  • You can use our 22 inch mesh head also for your bass drum! Heavy duty tested by many drummers. As a result the bounce back is natural and the strength is unimaginable.
Available in:
  • XS-PRO black
  • XS-PRO+ (RealHit) black
  • XS-PRO+ (RealHit) white

2BOX DRUMIT FIVE – MESH HEAD 14 INCH

 20,95
Makes a great kit even better!
With our class A Mesh Heads you can improve your 2BOX DrumIt Five kit substantially. Our XS-PROmesh heads have a unique structure and are made of 2 layers + a RealHit layer.
The RealHit layer is an extra layer which not only improves the feel of your kit but also the looks.
As a result the bounce back is better and the strength is unimaginable.
Give your kit a more natural feel!
Available in:
  • XS-PRO+ (RealHit) black

2BOX DRUMIT FIVE- MESH HEAD 10 INCH

 15,95
Makes a great kit even better!
With our class A Mesh Heads you can improve your 2BOX DrumIt Five kit substantially. Our XS-PROmesh heads have a unique structure and are made of 2 layers + a RealHit layer.
The RealHit layer is an extra layer which not only improves the feel of your kit but also the looks.
As a result the bounce back is better and the strength is unimaginable.
Give your kit a more natural feel! Available in:
  • XS-PRO+ (RealHit) black

2BOX DRUMIT FIVE- MESH HEAD 12 INCH

 16,95
Makes a great kit even better!
With our class A Mesh Heads you can improve your 2BOX DrumIt Five kit substantially. Our XS-PROmesh heads have a unique structure and are made of 2 layers + a RealHit layer.
The RealHit layer is an extra layer which not only improves the feel of your kit but also the looks.
As a result the bounce back is better and the strength is unimaginable.
Give your kit a more natural feel!
Available in:
  • XS-PRO+ (RealHit) black

AUDIO ADAPTER 6.35 MALE – 3.5 FEMALE

 6,95
Stereo gold plated audio adapter for headphone 6.35 male - 3.5 female to convert 3.5 male jack to 6.35 jack

BEYERDYNAMIC DT-770M

 139,00
The best headphone for drummers!
Great for playing at home on electronic drums or when playing along with pre-recorded or sequencer tracks. Drummers need a comfortable set of headphones with excellent ambient noise attenuation in order to hear click tracks or backing tracks clearly.
https://youtu.be/_Oh-Ewt-x_U

CMA-9 CONDENSER MICROPHONE

 89,00
Characteristics:
  • Transformer free Cardioid polar pattern
  • High sensitivity, low noise and wide dynamic range
  • Low frequency and sensitivity attenuation switches
  • Metal pop filter and shock mount
  • Durable roadworthy construction

CONE

 6,45
The perfect cone for building your own drum trigger.
Double-sided adhesive pads included.
Height: 1,6 inch
Diameter bottom: 1,6 inch
Diameter top: 0,314 inch

CONNECTOR JACK MONO

 3,50
Female Socket, 6.35MM, Jack Mono Mounting Type: Cable (solder) Panel Cut-out Diameter: 12mm Washer and nut included.

CONNECTOR JACK STEREO

 3,50
Female Socket, 6.35MM, Jack Stereo for output for head and rim. To be mounted in drum shell. Mounting Type: Cable (solder) Panel Cut-out Diameter: 12mm Washer and nut included.

CYMBAL MIC HOLDER

 14,95
Microphone Holder can be attached to any stand. The goose-neck allows you to place a microphone where you need it. For 3/8" microphone clips.

DCB-4 BASS DRUM MICROPHONE

 79,00
Tech specs:
  • Specific for low frequency response
  • Low disturbance when impedance varies, high gain before sound's feedback
  • Low noise, high SPL endurable, 144dB
  • Fit to use for bass drum, floor tom and the sound picking-up of other
  • Wide dynamic range bass instruments

DCT-4 DYNAMIC MICROPHONE

 69,00
Characteristics:
  • Specific frequency response
  • Low disturbance when impedance varies, high gain before sound's feedback.
  • Low noise, high SPL endurable, 140dB.
  • Fit to use for snare drum, rack toms, floor tom, and percussion

DIY TRIGGER SET FOR HEAD TRIGGERING

 12,50
This set includes:
  • 1 Piezo element
  • 1 Trigger cone
  • 1 Mono connector
  • Double-sided adhesive pads

DIY TRIGGER SET HEAD AND RIM TRIGGERING

 15,50
This set includes:
  • 2 piezo elements
  • 1 trigger cone
  • 1 stereo connector
  • Double-sided adhesive pads

DRUM MIC CLAMP

 12,50
Microphone rim clip for mounting a microphone onto your drum rims. The flexible, yet sturdy, construction provides stability and ease of installation. Adjustable height and cable clip. Any standard microphone clip fits on the mount with the included 5/8 inch to 3/8 inch thread adapter. Suggestion: use with SHM2 shock mount.

DUAL MICROPHONE ADAPTOR

 12,50
Dual Microphone Adaptor. Adaptor for placing two mics on one microphone stand. Perfect for miking toms.

E-CYMBAL EC12 – 12 INCH

 65,00
12 inch stereo E-cymbal (bow and edge, no bell), with cymbal choke. Can be used as ride or crash cymbal. Compatible with all Roland and Alesis modules and most other modules. Includes cymbal adapter for placing the E-cymbal. Also available in 14 inch. https://youtu.be/K0rMi_AcR6g

E-CYMBAL EC14 – 14 INCH

 79,00
14 inch stereo E-cymbal (bow and edge, no bell), with cymbal choke. Can be used as ride or crash cymbal. Compatible with all Roland and Alesis modules and most other modules. Includes E-cymbal adapter for placing the cymbal. Also available in 12 inch. https://youtu.be/K0rMi_AcR6g

EDGE BASS DRUM TRIGGER

 39,00
Convert your acoustic bass drum into a great electronic bass drum!
The metal black coated bracket of the Edge Bass Drum Trigger can be mounted easily with the already available screw of a bass drum lug. You can mount the connector in your bass drum shell - that's all!
Available for bass drum shell sizes 18 inch to 24 inch. Edge Bass Drum Triggers can be connected to Roland®, Pearl®, 2Box®, Pintech® or Alesis® drum modules.

EDGE DRUM TRIGGER

 39,00
Convert your acoustic drum kit into a great electronic kit! Available for drum shell sizes 8 inch to 16 inch. 682Drums Edge Drum Triggers can be connected to Roland®, Pearl®, 2Box®, Pintech® or Alesis® drum modules. The metal black coated bracket of the Edge Drum Trigger can be mounted easily with the already available screw of the lugs. With the accompanying rubber the risk of cross-talk is reduced substantially, so adjustments in the drum module are hardly or not necessary. The Edge Drum Trigger only triggers the drum head and not the rim. In case you want to trigger head and rim, please go to: Edge Drum Trigger + Rim Trigger. The connector of the Edge Drum Trigger is already prepared for head and rim triggering, so you can always decide adding a rim trigger in a later stage.

EDGE DRUM TRIGGER + RIM TRIGGER

 49,00
Convert your acoustic drum kit into a great electronic kit! The Rim Trigger can also be connected with the lug screws. Can be used for shell sizes 8 inch to 16 inch. The metal black coated bracket of the Edge Drum Trigger can be mounted easily with the already available screw of the lugs. With the accompanying rubber the risk of cross-talk is reduced substantially, so adjustments in the drum module are hardly or not necessary. Both triggers are connected to the female jack connector, which can be mounted in the shell. 682Drums Edge Drum Trigger can be connected to Roland®, Pearl®, 2Box®, Pintech® or Alesis® drum modules.

EDGE RIM TRIGGER

 15,00
The Edge Rim Trigger can be mounted in the shell of the tom. Simply by using the screw of one of the lugs inside the shell. This Rim Trigger is meant to be used together with the Edge Drum Trigger.

HEADPHONE HOLDER

 7,95
Mount this holder directly to your drums stand or cymbal stand. You'll always have your headphones within reach while playing on stage or in the studio.

HEADPHONE HOLDER

 7,95
Mount this holder directly to your drums stand or cymbal stand. You'll always have your headphones within reach while playing on stage or in the studio.

t-RIGG (green)

 49,00
The t-Rigg is a perfect solution for adding an additional trigger option to your electronic or acoustic drum kit. It can be used for sound effects, percussion sounds or any other sound you want to trigger. Great for percussionists! The outer shell of the t-Rigg is covered by a special rubber compound, allowing it to be struck anywhere. The end, that fits in the clamp, also has a rubber surface which reduces cross-talk substantially. The t-Rigg needs a mono connection. It works with all sound modules as well as pads such as the Roland SPD-SX and Alesis soundpads. The t-Rigg also can be connected to a computer in combination with a trigger/midi converter. More on t-Rigg? Watch the video below:        

t-RIGG (grey)

 49,00
The t-Rigg is a perfect solution for adding an additional trigger option to your electronic or acoustic drum kit. It can be used for sound effects, percussion sounds or any other sound you want to trigger. Great for percussionists! The outer shell of the t-Rigg is covered by a special rubber compound, allowing it to be struck anywhere. The end, that fits in the clamp, also has a rubber surface which reduces cross-talk substantially. The t-Rigg needs a mono connection. It works with all sound modules as well as pads such as the Roland SPD-SX and Alesis soundpads. The t-Rigg also can be connected to a computer in combination with a trigger/midi converter. More on t-Rigg? Watch the video below: https://youtu.be/Ch2I3EiiDps  

t-RIGG SET

 89,00 118,00
2 t-Riggs for a special price - in any color combination!                    
The outer shell of the t-Rigg is covered by a special rubber compound, allowing it to be struck anywhere. The end that fits in the clamp also has a rubber surface, which reduces cross-talk substantially.
  • Allows hitting at any angle.
  • Fits in every 1,5 inch / 38mm clamp.
  • Outstanding even triggering.
  • Superior isolation characteristics
  • Length: 210 mm
  • Lenght: playing surface: 140mm
  • Diameter: 38 and 45 mm
  • 1/4"- 6,3 mm Mono jack